WOLF ENERGY SA
/

Engineering & Technology

 

IEC

HYDRAULIC TURBINES

IEC 60041 / IS // Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines. - Geneva : International Electrotechnical Commission, 1991.

IEC 60193 / IS // Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests. - Geneva : International Electrotechnical Commission, 1999.

IEC 60308 / IS // Hydraulic turbines - Testing of control systems. - Geneva : International Electrotechnical Commission, 2005.

IEC 60545 / IS // Guide for commissioning, operation and maintenance of hydraulic turbines. - Geneva : International Electrotechnical Commission, 1976.

IEC 60609-1 / IS // Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines. - Geneva : International Electrotechnical Commission, 2004.

IEC 60609-2 / IS // Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 2: Evaluation in Pelton turbines. - Geneva : International Electrotechnical Commission, 1997.

IEC 60805 / IS // Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps. - Geneva : International Electrotechnical Commission, 1985.

IEC 60994 / IS // Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines). - Geneva : International Electrotechnical Commission, 1991.

IEC 61116 / IS // Electromechanical equipment guide for small hydroelectric installations. - Geneva : International Electrotechnical Commission, 1992.

IEC 61362 / IS // Guide to specification of hydraulic turbine governing systems. - Geneva : International Electrotechnical Commission, 2012.

IEC 61364 / TR // Nomenclature for hydroelectric powerplant machinery. - Geneva : International Electrotechnical Commission, 1999.

IEC 61366-1 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: General and annexes. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-2 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2: Guidelines for technical specifications for Francis turbines. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-3 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-4 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-5 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5: Guidelines for technical specifications for tubular turbines. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-6 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6: Guidelines for technical specifications for pump-turbines. - Geneva : International Electrotechnical Commission, 1998.

IEC 61366-7 / TR // Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7: Guidelines for technical specifications for storage pumps. - Geneva : International Electrotechnical Commission, 1998.

IEC 62006 / IS // Hydraulic machines - Acceptance tests of small hydroelectric installations. - Geneva : International Electrotechnical Commission, 2010.

IEC 62097 / IS // Hydraulic machines, radial and axial - Performance conversion method from model to prototype. - Geneva : International Electrotechnical Commission, 2009.

IEC 62256 / IS // Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement. - Geneva : International Electrotechnical Commission, 2008.

IEC 62270 / IS // Hydroelectric power plant automation - Guide for computer-based control. - Geneva : International Electrotechnical Commission, 2004.

IEC 62364 / IS // Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines. - Geneva : International Electrotechnical Commission, 2013.

 

ROTATING MACHINERY

IEC 60034-01 / IS // Rotating electrical machines - Part 1: Rating and performance. - Geneva : International Electrotechnical Commission, 2010.

IEC 60034-02-1 / IS // Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles). - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-02-2 / IS // Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests. - Geneva : International Electrotechnical Commission, 2010.

IEC 60034-02-3 / TS // Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors. - Geneva : International Electrotechnical Commission, 2013.

IEC 60034-03 / IS // Rotating electrical machines - Part 3: Specific requirements for syncronous generators driven by steam turbines or combustion gas turbines. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-04 / IS // Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests. - Geneva : International Electrotechnical Commission, 2008.

IEC 60034-05 / IS // Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification. - Geneva : International Electrotechnical Commission, 2006.

IEC 60034-06 / IS // Rotating electrical machines - Part 6: Methods of cooling (IC code). - Geneva : International Electrotechnical Commission, 1991.

IEC 60034-07 / IS // Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM code). - Geneva : International Electrotechnical Commission, 2001.

IEC 60034-08 / IS // Rotating electrical machines - Part 8: Terminal markings and direction of rotation. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-09 / IS // Rotating electrical machines - Part 9: Noise limits. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-11 / IS // Rotating electrical machines - Part 11: Thermal protection. - Geneva : International Electrotechnical Commission, 2004.

IEC 60034-12 / IS // Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-14 / IS // Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-14 / IS // Rotating electrical machines - Part 14: Machanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-15 / IS // Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines. - Geneva : International Electrotechnical Commission, 2009.

IEC 60034-16-1 / IS // Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions. - Geneva : International Electrotechnical Commission, 2011.

IEC 60034-16-2 / TR // Rotating electrical machines - Part 16-2: Excitation systems for synchronous machines - Models for power system studies. - Geneva : International Electrotechnical Commission, 1991.

IEC 60034-16-3 / TS // Rotating electrical machines - Part 16-3: Excitation systems for synchronous machines - Dynamic performance. - Geneva : International Electrotechnical Commission, 1996.

IEC 60034-17 / TS // Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide. - Geneva : International Electrotechnical Commission, 2006.

IEC 60034-18-1 / IS // Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines. - Geneva : International Electrotechnical Commission, 2010.

IEC 60034-18-21 / IS // Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification. - Geneva : International Electrotechnical Commission, 2012.

IEC 60034-18-22 / IS // Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Tests procedures for wire-wound windings - Classification fo changes and insulation component substitutions. - Geneva : International Electrotechnical Commission, 2000.

IEC 60034-18-31 / IS // Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines. - Geneva : International Electrotechnical Commission, 2012.

IEC 60034-18-32 / IS // Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance. - Geneva : International Electrotechnical Commission, 2010.

IEC 60034-18-33 / TS // Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses. - Geneva : International Electrotechnical Commission, 2010.

IEC 60034-18-34 / IS // Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Evaluation of thermomechanical endurance of insulation systems. - Geneva : International Electrotechnical Commission, 2012.

IEC 60034-18-41 / TS // Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters. - Geneva : International Electrotechnical Commission, 2006.

IEC 60034-18-42 / TS // Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters. - Geneva : International Electrotechnical Commission, 2008.

IEC 60034-19 / IS // Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies. - Geneva : International Electrotechnical Commission, 1995.

IEC 60034-20-1 / TS // Rotating electrical machines - Part 20-1: Control motors - Stepping motors. - Geneva : International Electrotechnical Commission, 2002.

IEC 60034-22 / IS // Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets. - Geneva : International Electrotechnical Commission, 2009.

IEC 60034-23 / TS // Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines. - Geneva : International Electrotechnical Commission, 2003.

IEC 60034-24 / TS // Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide. - Geneva : International Electrotechnical Commission, 2009.

IEC 60034-25 / TS // Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply. - Geneva : International Electrotechnical Commission, 2007.

IEC 60034-26 / IS // Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors. - Geneva : International Electrotechnical Commission, 2006.

IEC 60034-27-1 / TS // Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines. - Geneva : International Electrotechnical Commission, 2006.

IEC 60034-27-2 / TS // Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines. - Geneva : International Electrotechnical Commission, 2012.

IEC 60034-28 / IS // Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors. - Geneva : International Electrotechnical Commission, 2012.

IEC 60034-29 / IS // Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise. - Geneva : International Electrotechnical Commission, 2008.

IEC 60034-30 / IS // Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code). - Geneva : International Electrotechnical Commission, 2008.

IEC 60034-31 / TS // Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide. - Geneva : International Electrotechnical Commission, 2010.

IEC 60072-1 / IS // Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080. - Geneva : International Electrotechnical Commission, 1991.

IEC 60072-2 / IS // Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360. - Geneva : International Electrotechnical Commission, 1990.

IEC 60072-3 / IS // Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange number BF10 to BF50. - Geneva : International Electrotechnical Commission, 1994.